AIMS-55

Ideal for wires and cables identification by printing on tubing. AIMS-55 can also provide terminal insulation. Suitable for a multitude of technical needs generated by the industrial sectors which are sophisticated (automotive, electrical, professional electronics, transport, construction electric). Easy to implement.-55C -55C

• Thin wall flame retarded radiation cross-linked polyolefin heat shrink tubing.
• Shrink ratio 2:1, RoHs compliant.

AIMS-300

Ideal for wires and cables identification by printing on tubing. AIMS-300 can also provide terminal insulation. Suitable for a multitude of technical needs generated by the industrial sectors which are sophisticated (automotive, electrical, professional electronics, transport, construction electric). Easy to implement.

• Thin wall flame retarded radiation cross-linked poly- olefin heat shrink tubing.
• Shrink ratio 3:1, RoHs compliant.

AIMS-3000

Ideal for wires and cables identification by printing on tubing. AIMS-3000 can also provide terminal insulation. Suitable for a multitude of technical needs generated by the industrial sectors which are sophisticated (automotive, electrical, professional electronics, transport, construction electric). Easy to implement.

• Thin wall flame retarded radiation cross-linked polyolefin heatshrink tubing.
• Shrink ratio 3:1, RoHs compliant.

AIMS-DR3

Ideal for wires and cables identification by printing on tubing. AIMS-DR3 flattened tubing is manufactured with specially developed formulation and technology, which makes the tubing resistant to abrasion and to common fluids and solvants (Diesel).

• Thin wall flame retarded radiation cross-linked polyolefin heatshrink tubing.
• Shrink ratio 3:1, RoHs compliant.

AIMS-ZH2/ZH3

Ideal for wires and cables identification by printing on tubing. It is made with specially halogen free polyolefin. AIMS-ZH2/ZH3 can also provide terminal insulation. Suitable for a multitude of technical needs generated by the industrial sectors which are sophisticated (automotive, electrical, professional electronics, transport, construction electric). Easy to implement.

• Thin wall flame retarded radiation cross-linked polyolefin heatshrink tubing.
• Shrink ratio 3:1, RoHs compliant.

AOMS-300

Ideal for wires and cables identification by printing on flattened sleeve. AOMS-300 allows to keep all imprints organized. It can also provide terminal insulation. Suitable for a multitude of technical needs generated by the industrial sectors which are sophisticated (automotive, electrical, professional electronics, transport, construction electric). Easy to implement.

• Thin wall flame retarded radiation cross-linked polyolefin heatshrink tubing.
• Shrink ratio 3:1, RoHs compliant.

APMS

APMS is designed for printing on heat shrinkable tubing. It is light enough to be used everywhere (only 2 kg) and can be used for wiring identifications, maintenance or small workshops. The speed of the printer allows to print 30 sleeves/min (20 mm sleeves, 5 caracteres, semi-cut) with high printing quality.

• Thin wall flame retarded radiation cross-linked polyolefin heatshrink tubing.
• Shrink ratio 3:1, RoHs compliant.

ACLB

These self-protected labels are perfect for quick and easy cable identification or other general purpose. Writing directly on the label with a pen, total and permanent additional protection is provided by wrapping around the crystal clear tape over the handwritten text.

• High marking resistance
• Two sizes available to cover a wide range of cables
• Large white write-on area
• Easiest & quickest way to mark any wire or cable

AIMS System

Perfect for the identification of wires by printing on flattened tubing. The AIMS printer is a high performance thermal transfer printer specially designed for high volume and 24-hour cycles. It allows to print on AIMS flattened tubing with a diameter range from 3mm to 39mm giving the optimum in flexibility, print quality and permanence.

• High speed thermal transfer printer with cutting and pre-scoring capabilities controled by computer, specially designed for AIMS heat-shrink sleeves.
• Superior heat-shrink tubing quality (UL VW1, RoHs).
• 3:1 & 2:1 shrink ratio, zero halogen and diesel resistant heat shrink available.
• Meets SAE-AS5942 requirement for print permanence (Marking of Electrical Insulating Materials).

AATT

Used to provide insulation protection for cable termination, load-break switches power circuit breakers, etc.-55C.

• Used to provide insulation protection for cable termination, load-break switches power circuit breakers, etc.

ABBM/ABBH

Used to enhance the insulation properties of bus bar in switchgear and substation. Provides high resistance to tracking and arcing.

• The continuous length of supplied products make it more convenient and economical.
• Material: made from specially formulated radiation cross-linked halogen free compounds.

ADWST

The internal layer provides high insulation whereas the external layer provides electrical shielding. Very suitable for applications in power cable joints up to 36 kV.

• Very good insulator and excellent semi-conducting product.

ASCON

Suitable for application in power cable accessory.

• Chemical formula especially developed makes the tubing provides effective insulation screen on the high voltage cable connectors terminations.

ASCT

Ideal to be used in high voltage systems. Control the high electrical stress present at insulation screen termination and joint of power cables.

• Minimum shrink temperature: 100 C.
• Minimum full recovery temperature: 130 C.

ACTV

ACTV is medium wall tubing coated with hot melt adhesive developed to meet the specific needs of the CATV industry. It provides waterproof seal and mechanical protection for CATV connectors. The specially formulated adhesive strong bond to cable and cable jacket, but easily peeling off from metal connectors for re-entry to connector or splice.

• Operating Temperature: -55C to 110C
• Minimum fully recovered temperature: 120C

AHW / AHWA

Designed for applications to seal and protect electrical and communication connections. Provides excellent mechanical protection to cable joints and terminations, flexible gas pipes, etc....

• Operating temperature: -55C to +110C
• Shrink temperature: minimum recovery 120C
• Resistant to UV-radiation.

AHWA-6X

Ideal for application to extremely different diameter between cables, connectors and components, their high shrink ratio provides close fit to a wide variety of irregular shapes connector and figurations. Provide excellent mechanical protection to cable joints and terminations, complete environmental protection, and resistant to impact and abrasion.

• Resistant to UV-radiation.
• High electrical insulation.

AHWA-FR

AHWA-FR is semi-rigid, heavy wall tubing, flame retardant with hot melting adhesive, this specification is suitable for protecting electrical splices, cable terminations and joints where electrical insulation and waterproof properties are required.

• Flame retardant.
• Resistant to UV-radiation.

ALV KITS

These kits are designed for jointing 4 and 5 core 0,6kV Uo/1kV U plastic insulated cables armored or unarmored. The kits contain one outer and four (or five) core insulating sleeves depending on the type of cable. ( NAYY, NAYBY, NA2XY ) The kits also contain a cable sheath cleaner and an abrasive strip.

• Meet: VDE 623 S1, EN 50 393, ISO 9001

AMW / AMWA

Suitable for a variety of low voltage electrical and mechanical applications, where lighter weight and greater flexibility are important. Recommended to applications for light cable and wire harnesses that require water-proofing, protection, and sealing of connectors components within the tubing.

• High electrical insulation. High resistance to impact, abrasion and UV.
• MProvides excellent mechanical protection to cable joints and terminations.
• 3:1 shrink ratio allows it to fit over irregular shape and large connectors.

AMWA-FR

Medium wall tubing with hot melting adhesive flame retardant, suitable for protecting low voltage electrical splices, cable terminations and joints where electrical insulation and waterproof properties are required.

• High electrical insulation. High resistance to impact, abrasion and UV.
• MProvides excellent mechanical protection to cable joints and terminations.
• 3:1 shrink ratio allows it to fit over irregular shape and large connectors.

AWAS

AWAS cross linked polyethylene wraparound sleeves are suitable to restore XLPE and paper insulated cable’s outer jackets quickly and securely. They give excellent electrical, environmental and mechanical protection in LV joints. The sleeves are lined with hot-melt adhesive to ensure moisture or water penetration. Also suitable to use in LV branch joints.

• The wraparound sleeves are made from thermally stabilized cross linked weather resistant polymeric material. When heating, the sleeve shrinks and the adhesive melts create a watertight bond between the sleeve and the cable. Sleeve materials equals to the material properties of the original cable jacket, it closes easily with a flexible stainless steel channel. For insulation on low voltage cable up to 1000V.

ABOS 2-3 Fingers

ABOS LV heat shrinkable breakouts are made from radiation cross linked polyolefin. The material is weather and UV resistant and has excellent electrical insulating porperties which makes them widely used in the electric power industry on low voltage terminations both indoor and outdoor.

• Operating temperature:- 55°C to +110°C
• Minimum fully recovered temperature: 130°C
• 2 cores and 3 cores
• UV Resistant

ABOS 4-6 Fingers

ABOS LV heat shrinkable breakouts are made from radiation cross linked polyolefin. The material is weather and UV resistant and has excellent electrical insulating porperties which makes them widely used in the electric power industry on low voltage terminations both indoor and outdoor.

• Operating temperature:- 55°C to +110°C
• Minimum fully recovered temperature: 130°C
• 4 cores, 5 cores and 6 cores.
• UV Resistant

ABOS-CON

These three finger heat shrinkable conductive breakouts are electrically semi-conductive and ideal for creating a conductive screen on cable terminations up to 36kV cables. The three fingers and the base are covered with insulating mastic which secures a watertight seal. They are also UV and weather resistant.

• Resistant to UV-radiation.
• High electrical insulation.

ABOS-MV

These three finger heat shrinkable anti-tracking breakouts are ideal for terminations for up to 36kV cables. The three fingers and the base are covered with anti-tracking mastic which secures a complete enviromental and electrical seal. The breakouts are also UV resistant and flame retardant.

• Operating temperature: -55°C to +105°C
• Standard color: Red

AEC / AEC-L

Recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheets. Definitive recovery with the layer of spiral coated hot melt adhesive.

• Resistant to oxydation, ozone, UV radiation. Protects power cables up to 1000 V and telecommunication cables. Very easy to fit over cable end. Environment definitive watertight seal. Material: thermally stabilized crosslinked polyolefin, coated with specially hot melt adhesive.

AMBT-MV

These products have been developed to fit the two basic types of bushing arrangement, right angle and in line. Their main purpose is to minimalize the required space and insulate terminations in compact size equipment and cable boxes.

• Minimum shrink temperature: 110°C
• Standard color: Red

AMWA-FR

Medium wall tubing with hot melting adhesive flame retardant, suitable for protecting low voltage electrical splices, cable terminations and joints where electrical insulation and waterproof properties are required.

• High electrical insulation. High resistance to impact, abrasion and UV.
• MProvides excellent mechanical protection to cable joints and terminations.
• 3:1 shrink ratio allows it to fit over irregular shape and large connectors.

AMEC

AMEC is a dual wall heat shrinkable mini end cap designed to insulate and terminate connectors, electrical wires and other electrical equipment. Used to protect auto wires, shipping cable, bundle wires and metal tubes against water and moisture.

• Good electrical insulation and waterproof connection.
• Polyolefin, coated with specially hot melt adhesive.

ABFM

This self amalgamating tape is easy to apply on power cable accessory applications. It is a specially designed formula provides an excellent compatibility with polymeric cables. Used for electrical stress relief at the end of the cable screen in MV polymeric cable joints and terminations to ensure safe operation. Also used to fill voids and gaps during installation of cable joints and terminations particularly in connectors.

• Suitable for applications in power cable termination and joint 15kV, 24kV 36kV
• Operating temperature: 90 C

ACSC

Heat Shrinkable splices provide a permanent environmental seal. The polymer used in the production of the heat shrink tube is specially adapted to be crimped. Ideal for electrical equipment repairs, maintenance and outdoor electrical cabeling.

• Operating temperature: -55°C to +125°C
• Minimum shrink temperature: 110°C
• No wire damage thanks to a lower shrink temperature.
• 100% waterproof, excellent fluid resistance.
• Very high abrasion resistance.
• Shrink ratio: 3:1.
• RoHS compliant.

ADR-150, ADR-150 TW

This flexible elastomer tube provides protection for wire harnesses placed in harsh environments. Itssuperior diesel, lubricating and hydraulic oil resistance combined with flexibility and abrasion resistance makes this product ideal for military, aerospace and automotive applications.

• Operating temperature: -75°C to + 150°C
• Minimum shrink temperature: +175°C
• Meet: SAE-AMS-DTL-23053/16

AFOP

AFOP is specially designed to seal and protect fusion bonded optical cables. The tube has a hot melt adhesive inner liner with low temp flowing ability. The outer jacket is pre-shrunk to secure the stainless steel or ceramic rod in position for a reinforced mechanical protection. Both single and mass (ribbon) protectors are available.

• Operating temperature: -45°C to +100°C
• Minimum full recovery temperature: 120°C
• Approved to: BELLCORE SR 4301 & TCR-8

AGJB

Suitable for straight and branch off junctions. For extruded insulation low voltage cables 0,6/1kV, class 2, according to CEI 64-8 Protection higher than IP 68 according to CEI EN 60529 and IEC 529.

• Black outer shell made in PEHDUV resistant Re-enterable Patented cable blocking system of the cables Suitable for fixing the shell to external device by means of cable ties.

AKY-150

Can be used for jacketing and bundling of wires to form light-duty harnesses, where low profile, abrasion resistance, and flexibility are required. It reliably protect wires, solder joints terminals, connections from most industrial fluid solvents and fluid chemicals.

• High flame resistance.
• Excellent physical and electrical properties after exposure to many chemicals and solvents.
• Excellent transparency on clear version.

AKY-175

Excellent to insulate from high temperatures. It reliably protects wires, solder joints, terminals, connections, and components from most industrial fuels, solvents and chemicals.

• Semi-rigid tubing, ideal for applications that require high-temperature performance, outstanding abrasion and cut-through resistance or superior chemical and solvent resistance properties.

ARSM

The anti-tracking sealing mastic is made from a non-toxic, butyl composite. The self amalgamating and solvent free make the mastic effectively used in sealing cable joints and terminations to provide waterproof and void-filling.

• Suitable for applications in power cable termination and joint 15kV, 24kV 36kV
• Operating temperature: 90 C

ASCM

Heat shrinkable solder sleeves with the thin ring and PE outer layer provide a permanent encapsulation, insulation and strain relief on motor tabs, connectors pins ans switsh terminal. -55°C

• Suitable for applications in power cable termination and joint 15kV, 24kV 36kV
• Operating temperature: 90°C

ASSC

Heat shrinkable solder sleeves with the thin ring and PE outer layer provide a permanent encapsulation, insulation and strain relief on motor tabs, connectors pins and switch terminal.

• Thermoplastic inner insert at each end of the terminator, sealing against water and moisture. Refluxed solder ring, offers controlled soldering process.

ATFE

This Teflon® based tubing is designed for protecting applications in extreme electrical, or mechanical environments. Thanks to its compound it has exceptional friction resistance and withstands even aggressive chemical solvents.

• Operating temperature: -65°C to +260°C
• Minimum full recovery temperature: 350C
• Meet: SAE-AMS-DTL-23053/12

ATIE-SS / ES

ATIE series could be used in any electrical cabinet, electrical and electronic harnesses to secure wire & cable bundles. ATIE-SS is the standard serie suitable for standard application. ATIE-ES (Extra Strength) is suitable when superior strength is required.

• P.A.6.6 - General Purpose nylon is suitable for use in most practical applications at a continuous temperature from -40C up to 85C.

AVIT-200

Suitable for applications requiring high resistance to corrosive fluids, fuels, lubricants, acids, and solvents at elevated temperature (up to 200 C). Frequently used in harsh environments such as defence, aerospace or marine.

• Suitable for applications in power cable termination and joint 15kV, 24kV 36kV
• Operating temperature: 90 C